CAD-CUT® Premium Plus™
This is the material you need when using heat-sensitive items like nylon, Lycra, polyester, etc. It applies at a low temp to prevent scorching.
We carry the High Tack line of Premium Plus which means this isa great heat transfer material for cutting intricate designs. It is also great to use on fabrics that have some stretch to them. It is known for being soft & stretchable and it has a silky matte finish.
High Tack Application Instructions
Time: 8-12 Seconds
Two-Color Layer Press: 5 seconds, peel hot, next layer 5 seconds, peel hot, cover again, heat apply for 5 seconds
Note: We recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.
Heated Lower Platen Application
Lower Platen: 320°F
Upper Platen: 250°F
Time: 12-15 seconds (depending on thickness of garment)
Peel: Hot for High Tack
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.